BWMS CAPEX • Retrofit Off-Hire • Treatment Capacity • Power & Chemicals • Annual OPEX • Major Service • Lifecycle PV • Cost / Treated m³
Ballast Water Treatment System Cost, Retrofit CAPEX & Lifecycle Tool
Estimate the cash and economic cost of installing and operating a ballast water management system. Simple mode gives a fast installed-project and lifecycle-cost screen. Advanced mode sizes treatment capacity, builds retrofit CAPEX, models energy, chemicals, service and off-hire, and shows the levelized cost per treated cubic meter.
↑
Need treatment sizing, energy, chemicals, detailed retrofit scope or major-service planning? Click Advanced above.Simple uses quoted or planning-level installed costs and a fixed 8% discount-rate assumption. Advanced exposes the detailed cost and lifecycle drivers.InstallationCash CAPEX + off-hire
OperationsAnnual BWTS OPEX
LifecyclePV & levelized cost
BWTS Project
m³/hour.
% of equipment + installation.
days.
per off-hire day.
All-in annual planning estimate.
m³/year. Use 0 if unknown.
years.
Vessel & Treatment Sizing
m³.
hours.
m³/hour.
% of total ballast capacity.
m³/year; 0 uses calculated volume.
Retrofit CAPEX
% of direct retrofit CAPEX.
days.
per day.
Operating Cost
kWh/m³ treated.
currency/kWh.
currency/m³.
currency/m³.
years.
%/year.
Lifecycle Analysis
%.
BWMS Readiness Checks
Lifecycle Stress Cases
Test the economics against CAPEX growth, OPEX growth and lower treatment utilization. Values are percentage changes from the current Advanced base case.
| Case | CAPEX change % | OPEX change % | Volume change % |
|---|
Planning limitation: Cost outputs do not determine regulatory compliance or whether a specific BWMS is technically suitable. Use the vessel's approved Ballast Water Management Plan, applicable Administration/class requirements, the system Type Approval Certificate, maker OMSM, shipboard integration study and commissioning-test requirements for the actual installation.