SHIPUNIVERSE
Maritime Intelligence, Tools & Live Industry Radars

One place for live maritime intelligence, practical decision tools, industry events and focused reporting.

15Live Radars 263Maritime Tools
24/7Intelligence Focus
GlobalIndustry Coverage
NEW RADARS

Explore our latest intelligence radars

RADARS
TOOLS
All Tools
Latest 20
Open to load latest items…
NEWS
All News
Latest 20
Open to load latest items…
REPORTS
All Reports
Latest 20
Open to load latest items…
TECH
All Tech
Latest 20
Open to load latest items…
CRUISE
All Cruise
Latest 20
Open to load latest items…
NAVAL
All Naval
Latest 20
Open to load latest items…

Cargo Securing & Lashing MSL, Sliding & Tipping Calculator

CSS Code Annex 13 • MSL / MBL • Calculated Strength • Friction • Sliding • Tipping • Cargo Securing Manual • 2026 PSC CIC

Cargo Securing & Lashing MSL, Sliding & Tipping Calculator

Screen non-standardized cargo securing from certified lashing strength through directional sliding and tipping resistance. Simple mode answers the fast securing-capacity question. Advanced resolves weak-link MSL, individual lashing groups, angles, friction, port/starboard and fore/aft capacity, tipping moments, corrective lashings and Cargo Securing Manual readiness.

Figures represent
↑
Need much more depth? Click Advanced above.Advanced adds separate equipment weak links, MBL-to-MSL conversion, horizontal lashing angles, unequal port/starboard and fore/aft groups, tipping geometry, Cargo Securing Manual checks and additional-lashing economics.
Fast10 primary inputs
Core answerLongitudinal + transverse sliding
VisualDemand/capacity + angle chart

Fast Cargo Securing Screen

Use approved CSM / lashing-software accelerations. Simple mode assumes the same certified MSL and vertical angle for all active direct lashings and zero horizontal deviation from the direction being resisted.

tonnes.
g.
g.
g. Used conservatively to reduce normal load for this screen.
Use verified contact condition.
kN. Calculated strength CS = MSL / 1.5.
degrees from horizontal deck plane.
Count on the loaded/resisting side, not both sides combined.
Count at the loaded/resisting end.

Cargo Unit & Calculation Basis

tonnes.
m, used for longitudinal tipping screen.
m, used for transverse tipping screen.
m.
Use the ship's approved method where specified.

Approved Design Forces & Friction

g.
g.
g.
kN, direct-force mode only.
kN.
kN.
kN.
kN.
Verified cargo/deck interface governs.

Advanced Lashing Register

Each row is a load-resisting group. Quantity means the number of active lashings available in each selected direction. The weakest positive MSL among the lashing device, end fitting and deck fitting governs. Group labels remain on screen only and are not sent through Tool Data.

GroupDirectionCoverageQtyDeviceMBL kNMarked MSLEnd MSLDeck MSLα vertβ devCondition %Tip lever mUnit cost

Cargo Securing Manual & 2026 PSC Readiness

Current inspection context: Paris and Tokyo MoU are conducting a joint Cargo Securing CIC from 1 September through 30 November 2026. These checks support preparation but do not replace the official 10-question PSC questionnaire or the approved Cargo Securing Manual.

Additional Securing / Rework Scenario

Optional planning case for the controlling direction. Currency is display-only and no FX conversion is performed.

kN.
kN. 0 = derive from MBL where device factor is defined.
m.
% illustrative only.
Engineering limitation: a green screen does not authorize carriage. The approved Cargo Securing Manual, approved lashing software where applicable, certified MSL/SWL markings, actual deck/fitting strength, cargo-specific sea-fastening design, route/weather criteria, class/flag requirements and the Master's judgment control.
By the ShipUniverse Editorial Team — About Us | Contact