
🔔 Subscribe to ShipUniverse Weekly →
Clarksons Research estimates that the global shipping industry's annual bunker-fuel expenditure will exceed $220 billion in 2026, a record level, across a marine-fuel market of approximately 290 million tonnes per year. Managing Director Stephen Gordon presented the findings at the International Bunker Industry Association's annual convention in New York on November 11. Clarksons reiterated the estimate in its November 13 Bunker Market Trends analysis, with TradeWinds publishing additional coverage on November 16. Gordon reported that global bunker consumption has begun increasing again despite newly delivered vessels being approximately 50% more fuel-efficient than ships built 15 years ago. He also estimated that average shipping distances have increased around 10% this decade, with seaborne tonne-mile demand expected to rise approximately 1%–1.5% in 2026.
$220 Billion in Fuel.
290 Million Tonnes.
Demand Rising Again.
Translating the annual bill into operating scale
Simple arithmetic based on a $220 billion annual reference value. These are equivalent averages, not actual daily payments.
$220 billion divided by 365 calendar days.
Annual expenditure divided by 8,760 hours.
What small percentage differences represent
Industry-scale illustrations assuming the same annual transport requirement and fuel price. Not verified savings programs or individual company results.
Why more efficient ships can coexist with greater fuel demand
Same Fuel. Same Day.
Up to $145.50 per Tonne Apart.
Singapore's two-week price reversal
The decline from October 30 was followed by a partial rebound late in the following week.
Singapore VLSFO before the sharp early-November decline.
Down 20.1% from October 30.
Up $68 per tonne from November 11, but still below October 30.
Difference between buying 3,000 tonnes at the November 13 Singapore VLSFO assessment and Rotterdam's same-day assessment. Excludes port, delivery, detour and contractual costs.
Singapore's November 13 VLSFO premium over HSFO. This is a gross fuel-price spread, not scrubber net savings or a payback calculation.
Three changes in marine fuel procurement
Clarksons identifies fuel availability and supply security as central bunker-market concerns alongside volatile pricing.
Prices can move differently between major hubs, changing the relative economics of scheduled bunker purchases.
More ships are being ordered with alternative-fuel systems even as conventional oil fuels remain important across large sectors.
What Could 1% Less Fuel
Be Worth to Shipping?
Global spending assumptions
The initial expenditure and tonnage figures are rounded Clarksons research references. Other sliders are scenarios, not projections.
Positive means a modeled saving versus the selected annual reference. Negative means higher expenditure.
Industry reference adjusted for both fuel volume and price.
Can be negative if the scenario increases total fuel consumed.
Arithmetic spend divided by tonnes, not a traded bunker-grade quote.
Annual reference divided evenly across 365 days.
What drives the modeled cost change?
Fleet operating and project assumptions
All fleet and retrofit assumptions are hypothetical. Enter vessel-specific consumption and commercial details for a meaningful sensitivity analysis.
Discounted annual net fuel savings after assumed maintenance, less upfront retrofit expenditure.
Gross fuel savings less annual incremental maintenance.
Negative means longer operating routes exceed modeled efficiency gains.
Undiscounted capex divided by annual net benefits, if positive.
Constant nominal annual net cash-flow assumption.
Vessel count multiplied by baseline consumption and fuel price.
Number of vessels multiplied by assumed retrofit capex.
Steady-state annual fuel economics
Annual cash-flow projection
Year 0 is the investment. Subsequent years assume the same annual savings and maintenance. Scroll the table horizontally where necessary.
| Year | Fuel saved (t) | Gross benefit | Maintenance | Net cash flow | Discount factor | Discounted cash flow | Cumulative cash flow |
|---|
Methodology and model limitations
Global view: Adjusted fuel volume = starting tonnes × (1 + route/activity change %) × (1 − efficiency saving %). Adjusted expenditure = starting bill × adjusted-volume ratio × (1 + spending-per-tonne change %). The two changes are combined multiplicatively to avoid treating overlapping percentage effects as simply additive.
The implied expenditure per tonne is merely an average calculated from two rounded industry-scale estimates, not an observed bunker price or a common cost for all fuel products. A global expenditure percentage change does not guarantee the same percentage improvement in shipowner profits. The 2026 expenditure figure is not final audited spending.
Fleet view: Baseline tonnes = vessels × (sea days × sea tonnes/day + port days × port tonnes/day). Scenario tonnes = vessels × ((sea days + changed sea days) × original sea burn × (1 − efficiency %) + unchanged port-day consumption).
Annual gross fuel benefit = (baseline tonnes − scenario tonnes) × fuel price. Annual net benefit = gross benefit − extra annual maintenance. Project NPV = − total initial capex + sum of annual net benefit / (1 + discount rate)^year. IRR is the rate that makes NPV equal zero, when a valid solution exists. Simple payback uses undiscounted annual net benefit.
Critical limitations: Fuel costs may be borne partly by charterers, operators or cargo customers rather than by registered shipowners. Savings depend on who pays, who receives any contractual adjustment and whether cargo requirements are maintained. The fleet model excludes changes in charter hire, cargo carried, voyage earnings, capital financing, taxes, emissions costs, drydock time, installation downtime, residual value, variable fuel mix and future fuel-price escalation. It assumes a constant price and annual operating pattern during the projection.
Operational guardrail: The tool flags scenarios exceeding 365 annual operating days per vessel. Actual energy consumption also depends on speed, weather, drafts, machinery loads, fouling, fuel energy density and ship-specific operational constraints. Percentages entered here are user assumptions, not promised technical performance or verified savings from any particular coating, engine or service.
We welcome your feedback, suggestions, corrections, and ideas for enhancements.
Please click here to get in touch