
🔔 Subscribe to ShipUniverse Weekly →
SHIPUNIVERSE / TECH · NOVEMBER 20, 2026 · BULK CARRIER ECONOMICS
A dirty hull can quietly add thousands of dollars to a bulk carrier's daily bunker bill. Neptune Robotics says its cleaning robot can cover a full-draft Capesize in 24 hours. Louis Dreyfus Company is now helping test the technology in Singapore. But the commercial answer will not come from how quickly the robot moves. It will come from how much fuel the vessel saves afterward, for how long, and whether the process leaves its expensive coating intact.
What Singapore will actually test
Confirmed vs claimedLouis Dreyfus Company
LDC will make vessels from its more than 300-ship chartered fleet available for trials and share operational observations. This is not a commitment to clean every vessel.
Neptune's MAGNETO system
Its robots use AI-assisted inspection and cavitation waterjets. Neptune says they clean flat bottoms and vertical sides, capture removed material and tolerate currents up to four knots.
MPA innovation trials
Singapore selected six in-water cleaning partners for nearly S$3.7 million in R&D co-funding. The 18-month trials will assess safety, efficiency and environmental performance.
Evidence status: The 24-hour Capesize turnaround and four-knot current capability are vendor statements. The LDC programme's comparative fuel, coating and operational results have not yet been published; the partners expect findings in 2028. Do not treat its trial as proof of a particular fuel-saving percentage.
One Capesize, one cleaning: the financial hurdle
Illustrative, USDA useful calculation needs a finite period of improved performance. This example gives the cleaning 120 subsequent sea days of benefit, not an automatic year of savings.
At a comparable operating speed and load
Planning price, not a live bunker quote
Within the IMO's broad 1–5% guidance range
Before gains fade or another maintenance event occurs
The calculation: 42 × $650 × 3% × 120 = $98,280 gross fuel opportunity. At an illustrative $35,000 robotic service fee and $6,000 coating/port allowance, the net becomes $57,280, provided the entire fuel saving is financially captured and the cleaning causes no incremental vessel delay. Break-even requires about 51 benefited sea days. None of those costs is a Neptune quotation.
Three ways to restore a fouled hull
Not equivalent services| Approach | Where it works | Time and disruption | Principal risk | Cost decision |
|---|---|---|---|---|
| Robotic in-water cleaning | Large regular hull areas; flat bottoms and sides where permitted. Niche areas may require specialist follow-up. | Neptune claims 24 h for a full-draft Capesize. Other conditions can extend the job. | Coating compatibility, missed recesses, incomplete waste capture, location permits. | Service fee plus port delay, coating allowance and documentation. |
| Diver-operated cleaning | Targeted inspections, propeller and complex appendages, subject to diving limits. | Work time depends on conditions, crew and hull size; may need more than one stop. | Personnel exposure, coating abrasion, limited visibility and waste collection. | Lower quoted fee can be offset by a longer port stay or repeat attendance. |
| Drydock cleaning + recoating | Full coating renewal, repairs, thickness inspection, inaccessible areas and major deterioration. | Days of docking and planning, normally combined with other necessary survey work. | High direct cost and lost vessel time, but provides access for actual repairs. | Compare incremental docking cost; do not charge an already-required drydock twice. |
Comparable on fuel? Only partly. This report holds the basic post-cleaning fuel improvement equal between robot and diver unless a vessel-specific test demonstrates otherwise. Full recoating in drydock can produce a different, longer-lasting improvement, which deserves a separate lifecycle model.
Four reasons the advertised saving may disappear
Physical + contractualMinor slime may not justify a large cleaning bill. IMO's 1–5% screening range depends on actual fouling, operating profile and waters; it is not a guaranteed post-cleaning gain.
Some self-polishing and silicone fouling-release coatings are sensitive to cleaning force. A fuel benefit can be erased by premature recoating, coating loss or a disputed warranty.
A 24-hour job has little scheduling value if an 8-hour port stop requires 16 hours of extra waiting. Actual berth/anchorage permission, access and weather drive completion time.
Time charterers commonly buy bunkers. A shipowner may fund a cleaning while the charterer sees the immediate fuel saving, unless the charter terms allocate costs and rewards.
Coating and biosecurity are part of the economics
IMO 2025 guidanceIMO's 2023 Biofouling Guidelines and 2025 in-water-cleaning guidance warn that cleaning can abrade coatings and release biocides, microplastics and live organisms. Capture systems reduce these risks but must themselves be assessed.
| Coating / condition | Risk to control | Required evidence before cleaning |
|---|---|---|
| Self-polishing antifouling paint | Excess removal of the active coating layer and released coating substances | Paint-maker method, allowed contact pressure / jet settings, capture and condition photographs |
| Silicone / fouling-release coating | Surface damage and loss of low-adhesion performance | Written coating-specific compatibility, low-impact trial patch and before/after inspection |
| Hard or inert coating | Less coating abrasion sensitivity, but viable biofouling and debris can still spread | Fouling rating, jurisdiction-specific approval and waste-management method |
| Propeller, sea chests and niche areas | Residual fouling missed by a flat-surface robot and potential intake damage | Explicit inclusion/exclusion scope, specialist follow-up and evidence for each area |
Local permission first: IMO MEPC.1/Circ.918 generally favors in-water cleaning with waste capture; cleaning without capture is confined in the guidance to low fouling ratings and local authorization. Ports may impose stricter conditions or prohibit cleaning. A vendor's capture claim is not itself permission to operate.
Six acceptance gates for a paid trial
Owner's checklistRecord at least a representative pre-cleaning performance window. Normalize shaft power and speed for draft, trim, wind, waves and current; use an ISO 19030-style method.
Get a guaranteed cleaning area, hull survey, access window, expected hours and a list of niche areas excluded from the quoted service.
Record coating maker, type, age, warranty and approved cleaning method. Require a documented stop-work threshold for damage.
Check port authority approval, waste capture, filtration/disposal records and whether the system can operate under local restrictions.
Compare matched operating conditions over subsequent voyages, not a single good-weather noon report. Separate hull gain from propeller polishing or engine changes.
Agree who authorizes, pays and receives fuel savings. BIMCO's 2019 hull-fouling clause may allocate certain qualifying cleaning to charterers under specific conditions.
Buying decision: Pay for repeatable measured performance, not a headline savings percentage. If the coating warranty, biofouling disposal or charter-party cost allocation is unresolved, even a short cleaning time does not make a sound purchase.
INTERACTIVE / HULL-CLEANING ECONOMICS
Does robotic cleaning beat divers on your next port call?
Test three methods using the same fuel baseline. The calculation stops counting savings after the selected benefited sea days. Change the port window to see when a fast cleaning saves more in vessel time than it costs in fees. All prices are illustrative USD assumptions, not quotes.
Illustrative comparison, USD. Gross fuel value = tonnes/day × $/tonne × fuel-reduction fraction × benefited sea days × buyer-captured share. Robot cost = service fee + coating/extra-work allowance + max(0, cleaning hours − available port hours) / 24 × delay value/day. Diver cost follows the same formula with diver inputs. Drydock cost = incremental docking/recoating charge + extra days × delay value/day; its fuel saving assumes basic cleaning improvement plus selected extra percentage points for recoating. Net = gross fuel value − total method cost. Robot break-even sea days = full robot cost ÷ (daily fuel value × reduction × captured share), or no payback if denominator is zero. This does not include charter revisions, future fouling growth, fuel-price changes, propeller polishing, biofouling compliance, financing, damage liability, coating life, survey benefits or long-run drydock value. Net value means a scenario opportunity, not guaranteed cash profit. Ensure coating-maker approval and port permission before conducting underwater cleaning.
We welcome your feedback, suggestions, corrections, and ideas for enhancements.
Please click here to get in touch