SHIPUNIVERSE
Maritime Intelligence, Tools & Live Industry Radars

One place for live maritime intelligence, practical decision tools, industry events and focused reporting.

15Live Radars 263Maritime Tools
24/7Intelligence Focus
GlobalIndustry Coverage
NEW RADARS

Explore our latest intelligence radars

RADARS
TOOLS
All Tools
Latest 20
Open to load latest items…
NEWS
All News
Latest 20
Open to load latest items…
REPORTS
All Reports
Latest 20
Open to load latest items…
TECH
All Tech
Latest 20
Open to load latest items…
CRUISE
All Cruise
Latest 20
Open to load latest items…
NAVAL
All Naval
Latest 20
Open to load latest items…

Emergency Towing Arrangement, Towline Tension, Chock SWL & Tug Bollard Pull Tool

SOLAS II-1/3-4 • MSC.35(63) • MSC.549(108) • MSC.1/Circ.1691 • Tow Resistance • Towline • Chock • Strongpoint • Tug Pull

Emergency Towing Arrangement, Towline Tension, Chock SWL & Tug Bollard Pull Tool

Screen an emergency tow from steady resistance through dynamic line tension, towing-gear weak link and available tug force, then use Advanced for environmental resistance, statutory ETA strength, deployment, multiple scenarios, pennant/chafing checks and Emergency Towing Booklet readiness.

Figures represent Currency
↑
Need much more depth? Click Advanced above.Advanced adds projected-area resistance, wind/current/wave scenarios, statutory ETA strength, tanker vs 2028 non-tanker rules, lead-angle gates, pennant/chafing length, multiple tugs, deployment timing and full emergency-towing readiness.
Fast10 primary inputs
Core answerLine tension + weak link + tug pull
VisualLoad path + tug-force charts

Single Emergency Tow

Use a salvage-master, model-test, CFD, sea-trial or otherwise credible steady tow resistance if available. Simple mode does not infer resistance from vessel geometry.

kN before dynamic amplification.
degrees from horizontal.
kN.
% of MBL.
tonnes-force.
% after sea-state / tow-speed derating.

Regulatory & Vessel Basis

t.
%.
min where no automatic ETA timing applies.
Automatic statutory screen: tanker ETA uses 1,000 kN working strength from 20,000 to below 50,000 DWT and 2,000 kN at 50,000 DWT and above. New non-tankers ≥20,000 GT constructed from 1 January 2028 use the EN-based MSC.1/Circ.1691 tiers. This check is separate from predicted casualty tow load.

Vessel Geometry & Environmental Tow Resistance

m².
m².
kN. 0 uses model.

Advanced Tow Scenario Register

0° is ahead, 90° beam, 180° following. Scenario names are not sent through Tool Data.

ScenarioSpeed knWind knWind °Current knCurrent °Wave add %DAF

Towline, Chock, Strongpoint & Loose Gear

% MBL.
degrees each side.
m.
m.
m.

Tug Bollard Pull & Available Tow Force

tf.
%.
%.
%.

Deployment & Emergency Towing Booklet Readiness

min.

Optional ETA Upgrade / Towability Budget

Engineering limitation: emergency towing loads depend strongly on heading, yaw, sea state, wave encounter, tow speed, current, tug position, towline stiffness/catenary, shock load, hydrodynamic interaction and casualty condition. This tool does not replace a salvage master, ship-specific towing analysis, class/flag-approved ETA design, certified bollard-pull data, approved shipboard SWLs, manufacturer limits or the Emergency Towing Booklet.
By the ShipUniverse Editorial Team — About Us | Contact